■ Spec 1.

■ 100% servo bending machine

■ Average 50% energy savings

■ noiseless work

■ Very low maintenance costs

■ Standard machine sizes: 1600, 2100, 2600, 3100 mm

■ Standard machine performance: 40, 65, 80, 100 tons

■ Machine stroke 300mm

■ Daylight 590 mm

■ No crooning required

■ No hydraulic oil required

■ Standard 4-axis backgauge: X:800mm R:250mm, Z1, Z2

■ 3D Color Touch Screen Controller: DELEM 69T, ER TOUCH MASTER

■ Ergonomic and user friendly controller panel

■ Electrical panels conforming to CE standards by adopting SIEMENS electrical and automation products

■ WILA NSCL-I-MC/UPB upper clamping system for easy bending blade detachable

■ WILA OB-I-MC-TY/UPB Bottom Clamping System

■ LEUZE MLC 100 Full Safety System

■ Rear sliding guard + switch safety system

■ Side guard + switch safety system

■ Sliding front supporter with T slot and millimeter/inch

■ Spec 2.

By pulling the belt from the pulley, the two servo motors are synchronized to move the upper beam to enable accurate bending.

Hydraulic oil is not required for machine operation, so there is no need for an up-and-down equipment such as hydraulic filters and sealing.

Therefore, the maintenance cost is relatively very low and there is no contamination of the working environment due to hydraulic leakage.

Environmentally friendly technology enables 68% energy reduction rate and low noise operation compared to existing hydraulic bending machines.

The force is uniformly transmitted throughout the upper beam, allowing very precise bending and thus no crowning work is required.

The frame has a no-throat shape due to its structure, allowing for more solid and detailed bending.

It can be bent long between the side columns.

There are no obstructions such as hydraulic press brakes.

The front supporter makes it easy to accurately position and measure the bending material.

Four-axis servo motor drive backgauge X:800mm and R:250m allows accurate and fast position selection